|
|
|
|
Net2 Plus Wired 1 Door Access Control Unit in Plastic Housing with 2 Amp PSU
Code PXT682531 Available in
The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control unit also has a RS485 connection. This means it can be connected to other Net2 plus control units using a dedicated CAT5 cable.
One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus units, removing the need for an independent TCP/IP to RS485 converter.
- Single door networkable access control unit
- Plug into a TCP/IP network using a standard RJ45 plug
- Net2 plus can replace a TCP/IP convertor
- Net2 plus can also connect using RS485
- Net2 plus and Net2 nano control units can be mixed on a site
- Diagnostic LED's
- FLASH memory allows easy upgrades
- Use Paxton Access or 3rd party readers
Any changes made at the PC are immediately communicated and stored at the control unit. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.
Weights and Dimensions
| Width |
190 mm |
| Height |
190 mm |
| Depth |
60 mm |
| Weight |
0.28 kg |
Additional Specifications
| Np. of codes |
max. 50 |
| Code length |
4 - 8 digits |
| PIN length |
4 - 8 digits |
| No. of card holders |
max. 50000 |
| Readers/keypads per door |
max. 2 per port |
| Time zones |
max. 64 |
| Individual times within a time zone |
max. 2000 |
| No. of events stored on ACU |
2454 |
| Ethernet network speed |
10 - 100Mbps |
| Ethernet bandwidth required |
9 - 200kbps |
| Dimensions |
W232 x H320 x D80mm |
Are you an end user and would like the contact details of a local reseller? Email Us
|
|
|